Gutter Installation Cost Calculator

Gutters protect your foundation and siding from water damage. Cost runs per linear foot, with material choice the biggest driver — aluminum, steel, and copper are very different prices.

Direct answer

What does this tool do?

Gutter Installation Cost Calculator computes the result directly in your browser — Gutters protect your foundation and siding from water damage. Cost runs per linear foot, with material choice the biggest driver — aluminum, steel, and copper are very different prices. Nothing you enter is uploaded or stored.

Material drives price: aluminum ≈$9-14/linear ft, steel ≈$12-18, copper ≈$34-52 installed. What moves cost most: material, gutter size (5in vs 6in), and whether gutter guards are added. Regional: 0.85× rural to 1.35× metro. Value: working gutters are the cheapest foundation insurance you can buy.

How this calculator works

cost = sum(line-item ranges per linear ft) x size x regional factor. Mid-tier items: Aluminum gutter (6in) + guards $6.5-10, Downspouts & hangers $2.0-3.5, Install labor $4.5-7.0.

Worked example

A 160 linear ft project at mid tier with the national labor factor (1.0): line items sum to $2,080-$3,280, midpoint about $2,680. Try these numbers in the calculator above; adjust the regional multiplier for your metro.

What drives gutter installation cost most

Material is the biggest swing: mid-tier continuous-roll aluminum runs $13-20.50 per linear foot installed, while the premium tier trades up to heavier-gauge metal and larger downspouts. Labor is the other half of the bill, and it grows with every inside corner, downspout, and story of the house.

Run length dominates the total because it multiplies every line item. A 160-foot single-story run lands at $2,080-3,280, but the same run on a two-story home adds ladder and safety time. Fascia condition matters too: rotten boards must be replaced before gutters hang on them, and that work is not in the base ranges.

How to keep your gutter install budget honest

Measure the actual run in linear feet along the roofline, not the house footprint, and count corners and downspouts before you compare quotes; contractors price the same way the calculator does, per foot plus complexity. Set the regional multiplier honestly: 1.0 national, 1.2+ in major metros.

Use the tier select to price a like-for-like decision rather than the cheapest bid. If you are considering DIY, switch to DIY mode and enter real numbers for the gutter-machine rental or sectional kit; the tool shows what pro labor you are taking on, and two-story work usually justifies the quote.

How Gutter Installation cost is calculated, step by step
Step-by-step: how this gutter installation calculator builds its estimate

FAQ

How much do gutters cost to install?

About $9-$14 per linear foot installed for aluminum in 2026 examples — a typical 160 ft house runs $1,400-$2,300. Copper is $34-$52/linear ft.

Aluminum or copper gutters?

Aluminum is the standard, affordable choice (20+ years with proper maintenance). Copper is premium and can last 50+ years but costs 3-4×. Steel sits in between with more durability than aluminum but it must be kept painted to avoid rust.

Should I add gutter guards?

Guards prevent clogs and reduce cleaning, but they add cost and still need occasional debris removal. They pay off on houses with heavy tree cover; otherwise a regular cleaning schedule may be cheaper.

These are editable example ranges for budgeting, not contractor bids. Actual project cost varies by region, site condition, and finish level. Get 3 quotes before committing.

Use this result

Share the current inputs or ask ChatGPT to explain the calculation in context.

More options
Report a calculation issue

Deriving the per-foot math from a real quote

Take a 200 ft one-story run at mid tier with multiplier 1.0. Line items: material $13-20.50, guards $6.5-10, downspouts and hangers $2-3.5, labor $4.5-7. Low end sums to 13+6.5+2+4.5 = $26/ft; high end 20.5+10+3.5+7 = $41/ft. So the base envelope is $26-41 per linear foot, which is what a per-foot quote should sit inside.

Now price 3 downspouts and 4 inside corners as adders. If a corner adds about $15 of extra miters and labor and a downspout adds about $40, that is 4 x 15 = $60 plus 3 x 40 = $120, so $180 of complexity on top of the run. At the $26-41/ft envelope the 200 ft run is $5,200-8,200 before the regional multiplier; at 1.2 the same job is 5,380 x 1.2 = $6,456 at low end and 8,380 x 1.2 = $10,056 at high end. If a bid lands far below the low envelope, it usually means thinner material or excluded corner and downspout adders, not a bargain.

Where the estimate breaks down

Fascia replacement is the most common surprise. Boards run about $3-8 per linear foot of fascia replaced, so a 200 ft house with 40 ft of rot adds $120-320 plus disposal, and many base bids exclude it entirely. Reroof timing is another edge case: installing gutters before a roof replacement can mean removing and reinstalling them, roughly $2-4/ft each way, or $800-1,600 round trip on that same 200 ft run.

Pitch and sizing also move the number. A steep 10/12 roof needs more staging and slower work; crews commonly quote 10-20% more, which on a $6,456 low-end job is another $645-1,291. Sectional gutters on long runs leak at seams within 10-15 years; seamless continuous roll avoids that but needs a machine on site, which is why some rural areas carry a trip minimum of $300-500 instead of pure per-foot pricing. None of these show up if you compare quotes on run length alone.